Tile Installation in Duluth, MN & Superior, WI
Floor tile, wall tile, backsplashes and grout repair, set on a substrate that will not crack it. We check what is under the tile before we price it, and the quote lists prep as its own line.
Prefer to text? Text (715) 919-7956 · $95 visit fee, waived when you approve the work
Twin Ports Contracting & Repair installs floor tile, wall tile and kitchen backsplashes in Duluth, MN and Superior, WI, and repairs grout and cracked tile. Our planning range for a typical kitchen backsplash run is $450–$1,200, with the tile as its own line; floors are priced after we check the subfloor, as one flat written quote you approve before work starts, and the $95 visit fee is waived when you approve the work.
| Work included | kitchen backsplash tile, bathroom floor tile, entry and mudroom tile, kitchen and laundry floor tile |
|---|---|
| Where | Duluth, MN, Superior, WI and the surrounding towns |
| Visit fee | $95 when a visit is needed, waived once you approve the work; no mileage charge. |
| Getting started | Call or text (715) 919-7956, or send photos through the quote form. |
Updated by Twin Ports Contracting & Repair, Duluth, MN
Tile Is Only as Good as the Surface Under It
Tile itself is hard and unforgiving. It does not bend, so a floor that flexes will crack it and a wall that is out of flat will show every lippage ridge in the light. That is why a tile job here starts with the substrate: a plank subfloor that moves, a slab that sweats, plaster behind a kitchen counter that has never been flat. We look at that first, then quote the prep, the tile, the grout and the seal as separate lines so you can see where the money goes.
Twin Ports Contracting & Repair installs floor tile, wall tile and kitchen backsplashes in Duluth, MN and Superior, WI for a flat written quote you approve first, and our visit fee is waived when you approve the work. For planning, a typical kitchen backsplash run is $450–$1,200, with the tile as its own line, and the tile backsplash cost guide shows what moves it. Shower tile jobs add waterproofing behind the tile and are covered under shower repair and remodeling.
What Our Tile Installation Work Covers
- Kitchen backsplash tileSubway, mosaic and full-height runs
- Bathroom floor tilePorcelain and ceramic, laid on a flat, stiff floor
- Entry and mudroom tileSlip-resistant tile that handles wet boots
- Kitchen and laundry floor tileSet with room for the appliances
- Wall tileVanity walls, fireplace surrounds and accent walls
- Tile prep and substrate repairFlat, solid and dry before tile goes down
- Cement board and underlaymentInstalled and sealed for tile on floors and walls
- RegroutingCracked or stained grout removed and replaced
- Cracked tile replacementSingle tiles lifted and swapped
- Grout and tile sealingSealed where the material calls for it
- Basement slab tileMoisture checked before tile goes down
- Heated floors under tileTile set over a heating mat; an electrician installs the element
Common Tile Installation Projects
| Project | What's included | Good to know |
|---|---|---|
| Kitchen backsplash | Old backsplash removed, wall prepped, tile set, grouted and sealed, caulk at the counter | Outlet boxes get extenders so the covers sit flat on the tile |
| Bathroom floor tile | Old floor out, subfloor checked, cement board or underlayment, tile, grout and seal, toilet reset | Often paired with a new toilet; see toilet installation |
| Regrouting a floor or wall | Old grout ground out, tile cleaned, new grout and sealer | Only a fix if the tile is still stuck down tight |
| Basement or entry slab | Slab checked for moisture and flatness, then tile on a mortar bed | Slab cracks can show through if they are still moving |
Want a rough number first? The cost guide covers tile installation work and the estimator sums a list. The quote you approve is based on your photos, measurements and finish.
For local prices, see the tile backsplash cost guide.
What Goes Under Floor Tile: Subfloors, Cement Board and Slabs
A tile floor needs a stiff, flat, dry base. Over a wood floor that means a subfloor that does not flex, then cement board or an approved underlayment fastened to it, so the tile and the thin-set above are not carried by a floor that bounces. Tiles that keep cracking along one line almost always mean the floor underneath flexes. Plank subfloors, common in older Duluth and Superior houses, are the usual cause, and they are often stiffened or covered with a new layer before tile goes down. Soft or rotted spots, such as beside a toilet, are repaired first.
Over concrete the question is moisture and movement. A basement slab in a Superior clay-soil neighborhood or a Duluth hillside house can sweat in summer, and a slab crack that is still moving can telegraph through tile. We check the slab for moisture and for cracks before we quote, and we say whether tile is the right choice or whether another floor would behave better. For the other flooring choices, see the flooring and LVP and laminate pages.
Backsplashes and Wall Tile in Older Kitchens and Baths
A backsplash is one of the simpler ways to change a kitchen, and it rewards patience on the prep. Counters go in first, since the bottom row of tile sits on the finished top, and the wall behind is checked for flatness. In older Twin Ports kitchens that wall is often plaster over lath, seldom flat, and sometimes loose behind the paint. We repair or cut back what is loose, set the tile, grout it and seal where the material needs it, and finish the counter joint with caulk, not grout, so the movement between wall and counter does not crack the tile.
Outlets and switches in the tiled area need box extenders, so the plates sit flat on the finished surface, and a new outlet belongs to a licensed electrician under an electrical permit. Behind a stove or sink we keep the tile run clear of heat and water. For the cabinets, counters and the rest of the room, see kitchen remodeling; for wall tile in a bath, bathroom remodeling covers the whole room.
Grout Repair, Regrouting and Cracked Tile
Grout is not waterproof, and it is not meant to last forever. It stains, cracks along movement joints and powders out where it was mixed too wet. Regrouting means grinding out the old joint, cleaning the gap, and filling it with new grout, then sealing it if the grout type calls for it. It restores the look and the stain resistance, and it is a good fix when the tile underneath is firmly stuck down.
A joint that cracks again within a season points to movement underneath, and a tile that rings hollow points to a failed adhesion. Regrouting over either just hides it. Those floors need the loose tiles lifted and the cause fixed first. In a tiled shower, grout is only the surface layer, and water that gets behind it is a different problem handled on the shower remodeling page. Matching an old tile is the hard part of any replacement, so keep a spare box when you can.
Regrout, Replace Tiles or Redo the Floor? Tile Decisions
Cracked grout and a cracked tile are different problems from a floor that flexes. Match what you see below to find which one you have.
| What you're seeing | Likely cause | Usual fix | Who handles it |
|---|---|---|---|
| Stained, cracked or powdery grout, tile solid | Aged grout, no movement underneath | Grind out and regrout, then seal | Us |
| One or two cracked tiles | An impact, or a spot where the bond failed | Lift and replace the tile, using a spare if you saved one | Us |
| Tiles crack along one line, or sound hollow | A floor that flexes, or a failed bond | Lift the tiles, stiffen the subfloor and reset | Us |
| Tile over a basement slab is cracking or lifting | Moisture or a slab crack that is still moving | Check the slab for moisture and movement before any new tile | Us, with the slab checked first |
| Loose wall tile in a shower, with a stain or soft spot nearby | Water has gotten behind the tile | Rebuild the shower wall, a larger job | Us, under shower remodeling |
| You want a heated floor under new tile | Comfort upgrade | Electrician installs the heating element; we set the tile | A licensed electrician under an electrical permit, then us |
Tile in a Place Where the Ground Moves Every Winter
Freeze and thaw work on everything that sits on a Northland house. Plank subfloors move with the seasons, basement slabs crack and sweat, and unheated entries swing through a wide temperature range. Tile tolerates none of that movement, so the answer is stiffer substrate, flexible joints where the floor meets the wall, and a slab that has been checked for moisture before tile goes down. We talk it through for your actual house in Duluth or Superior, where the same tile can last in one room and crack in the next.
Tile Work Around the Twin Ports
Setting tile needs no building permit in the Twin Ports cities, so the differences by place are mostly about what is under the tile and what the heating or plumbing around it requires. Here is what each office says, with the source, and what the age and soil of the houses mean for the tile itself. Wherever you are, we check what your address needs before we quote.
Tile Installation in Duluth, MN
Duluth lists tiling and similar finish work among projects that need no building permit (City of Duluth); a moved toilet drain, a tub-to-shower swap or a structural subfloor repair is a different question. Plank subfloors and plaster walls decide the prep.
Tile Installation in Superior, WI
Superior's Permits Not Required list covers floor and wall tile and cement board under tile, and it also names sealing or coating an interior concrete floor (City of Superior). Basements are the other Superior question. The red clays in and around the city are poorly drained (Wisconsin DNR), so a basement slab can carry moisture, and we check it before tile goes down on concrete. A sweating slab is a reason to choose a different floor, not a reason to skip the check.
Hermantown, Proctor and Rice Lake
Hermantown needs no permit for interior painting or flooring, and it sends electrical permits through the state Department of Labor and Industry (City of Hermantown), so the heating element for a heated tile floor there is an electrician's job on a state permit (Minnesota DLI). Proctor needs no building permit for ceramic tile or floor coverings (City of Proctor). Minnesota's code exempts tiling and similar finish work from permits (Minn. R. 1300.0120), which covers Rice Lake and the other Minnesota cities.
Not sure which office covers your address? The Minnesota and Wisconsin permit office lists name the city, township or county office for each town, with its phone number and what it exempts.
How the Tile Installation Quote and Job Run
What to Send for a Tile Quote
Photos and a few measurements are enough to start. Send a wide shot of the room or wall, a close-up of the existing surface and the edges where the tile will stop, and the approximate length and width of the area. For a backsplash, note the counter length and the height you want, and the number of outlets in the run. If you have chosen the tile, send the size, and tell us if the floor feels bouncy or soft anywhere. Never pry up old floor material you suspect is old vinyl.
Before requesting a quote, include: Photos of the surface and the edges; Approximate length and width, or backsplash length and height; The tile size or box, if you have chosen it. The repair-list planning guide shows how to organize all of this before you write to us.
How a Tile Installation Job Works
- Send the details. Photos and a few lines about the tile installation work go in the quote form, or you can call or text (715) 919-7956.
- Get a flat written quote. Each quote is a flat number, and the $95 visit fee, charged only when a visit is needed, is waived once you say yes to the work.
- Pick a day. Tell us which days are best and we book around them.
- Work done, then a walkthrough. The tile installation job ends with a cleanup and a walkthrough, and the workmanship carries a written guarantee: if it fails, we redo it at no charge.
Tile Installation Questions
Does tile installation need a permit in Duluth or Superior?
No, not for tile itself. The City of Duluth lists tiling and similar finish work among the projects that need no building permit, and Superior's Permits Not Required list covers floor and wall tile and the cement board under it. A tile job that includes moved plumbing or structural subfloor repair is different, and we check what your address needs before we quote.
Can tile be installed over my existing tile or vinyl floor?
Sometimes, but it is rarely the shortcut it looks like. A sound, flat, well-adhered tile floor can occasionally take new tile, while old vinyl, its adhesive and any soft spots underneath have to be dealt with first. In an older home, old vinyl and adhesive can contain asbestos, so it is tested before anyone pulls it up. Photos of the floor and the transition at the door let us tell you which case you have.
Can tile go on a plaster wall behind my kitchen counter?
Yes, if the plaster is sound. Loose or hollow plaster is repaired or cut back first, and then the wall is made flat enough for tile, since older kitchen walls are seldom flat. Outlet boxes need extenders so the cover plates sit flush on the tile, and a flexible caulk joint goes where the tile meets the counter. We check the wall with a straightedge during the visit and say what prep it needs on the quote.
Can you fix cracked grout without replacing the tile?
Yes, as long as the tile is still firmly stuck down. We grind out the old grout, clean the joints, regrout and seal. If tiles sound hollow when tapped, or the same joint keeps cracking, the problem is underneath, a floor that flexes or a failed adhesion, and new grout would only hide it. A single cracked tile can be lifted and replaced. Matching an old tile is the hard part, so save any spares.
Can you put tile over a heated floor?
Yes, tile is a common surface over an electric heating mat. The heating element itself is electrical work, so a licensed electrician installs it under an electrical permit, and we do the tile around it. Plan for the thermostat wire and the outlet location before the floor goes down, since both are hard to add afterward. We coordinate the order with the electrician, because the mat goes down before the tile and the tile cannot go on until it is tested.
How much does a tile backsplash cost in Duluth?
Our planning range is $450–$1,200 for a typical kitchen backsplash run, with the tile as its own line. Tile size and pattern, removing an old backsplash, prep on uneven plaster walls and the number of outlets that need extenders all change the scope. Floor tile is priced by the room because the prep varies so much. See the tile backsplash cost guide. Your flat written quote is the real number.
When should the tile be ordered: before or after the quote?
It helps, but you don't have to. Choosing the tile first lets the quote account for the tile size, the pattern and the extra you need for cuts, and large-format or natural stone tiles ask more of the floor underneath. If you are undecided, tell us your budget and rough preferences. Whichever you choose, order extra for breakage and for future repairs, and keep the spare boxes, since a discontinued tile is hard to match.
These answers also sit in the Tile Installation section of our FAQ, alongside questions on pricing, scheduling and coverage.
Service Area and Towns We Cover
We take tile installation jobs across the Northland; choose the closest town for local details.
Duluth neighborhoods:
Superior neighborhoods:
Tile installation work reaches past these cities too. The surrounding town notes name the smaller towns, and the Minnesota and Wisconsin guides list what to include in a request from each.
Town checklists for tile installation projects
Project notes for towns across the service area:
Services That Pair With Tile Installation Work
A Tile Job Worth Doing Once
Send photos of the wall or floor, a rough measurement and the tile if you have chosen it, and we'll put a flat price in writing before any work starts.
Prefer to text? Text (715) 919-7956
- $95 visit fee, waived when you approve the work
- Same price across the service area
- Insured, background-checked staff