Serving Duluth, Superior & nearby Minnesota and Wisconsin towns Mon–Sat 7am–6pm (715) 919-7956

Plaster Repair in Duluth, MN & Superior, WI

Cracks, bulges, loose sections and holes in plaster and lath walls repaired so the wall stays plaster, with the finish matched to the waves of the old surface. We also tell you whether your walls are plaster or drywall before we quote.

Prefer to text? Text (715) 919-7956 · $95 visit fee, waived when you approve the work

Twin Ports Contracting & Repair repairs plaster and lath walls and ceilings in Duluth, MN and Superior, WI: cracks, bulges, holes and water damage, patched so the wall stays plaster. We also tell you if your walls are plaster or drywall. Plaster is priced from photos or a visit as one flat written quote you approve first.

At a glance
Typical jobshairline and settling cracks, cracks from door and window corners, loose or bulging plaster, sagging plaster ceilings
Where we workDuluth, MN, Superior, WI and the surrounding towns
Visit fee$95 when a visit is needed, waived once you approve the work; no mileage charge.
First stepCall or text (715) 919-7956, or send photos through the quote form.

Updated by Twin Ports Contracting & Repair, Duluth, MN

Keep the Plaster, Fix the Part That Failed

Twin Ports Contracting & Repair repairs plaster walls and ceilings in Duluth, MN and Superior, WI, from hairline cracks to bulges that have let go of the lath. You get one flat written quote and approve it before work starts, and our visit fee is waived when you approve the work. Plaster is priced from photos or a visit, not from a table, because a crack that needs tape and a skim coat is a different job from a ceiling section that has come loose.

Most plaster is in better shape than it looks. The wall is a thick, hard shell held to wood strips by plaster that squeezed between them, and when a crack opens or a patch bulges, the question is whether those keys still hold. We check by pressing, tapping and looking at the lath from the attic or basement when we can. Sound plaster is re-secured, taped and skim-coated. Plaster that has failed over a large area is cut back or covered. Tearing out a sound plaster wall is rarely the right first step.

What Our Plaster Repair Work Covers

  • Hairline and settling cracksTaped where they keep reopening, then skimmed
  • Cracks from door and window cornersOpened, meshed and skim-coated
  • Loose or bulging plasterScrewed back to the lath with plaster washers
  • Sagging plaster ceilingsSupported, re-secured or covered before they drop
  • Holes and old wiring cutsPatched with plaster or drywall shimmed to thickness
  • Water-damaged plasterCut back to firm material once the source is fixed
  • Skim coatingFollowing the waves of the old wall, not a straightedge
  • Plaster over masonryConcrete and brick walls patched with bonding materials
  • Rock lath and blueboard wallsGypsum-panel bases and thin veneer plaster patched
  • Matching smooth or sand finishesPatch texture blended into the old finish
  • Plaster or drywall? identificationSwitch plate, level and attic checks before we quote
  • Prime and paint after repairWhole wall corner to corner so the patch disappears

Common Plaster Repair Projects

Plaster Repair project examples: compare the work included and the details to confirm before booking.
ProjectWhat's includedGood to know
Hairline crack, plaster soundFill or tape, skim and primeCracks that keep reopening get tape as well as filler
Bulge or loose areaPlaster washers pull it back to the lath, then tape and skimPress gently: if it moves or crunches, the keys have broken
Hole or wiring cutPlaster or drywall shimmed out to the wall's thicknessStandard half-inch drywall sits below an old plaster surface
Soft or crumbling after a leakSource fixed, dried, then cut back to firm plaster and patchedPowdery plaster will not hold a skim coat or paint
Most of a ceiling is looseDrywall screwed through the plaster into the joistsSkips a messy tear-out if the added layer will not crowd the trim

Budgeting for plaster repair work? The cost guide and its estimator show planning ranges; the price you approve comes from photos, measurements, access, materials and the finish.

Plaster or Drywall? How to Tell What Your Walls Are

If your house went up before World War II, the walls are probably plaster; the National Park Service says plaster was the wall surface chosen for nearly all buildings until the 1930s or 40s (NPS Preservation Brief 21). Gypsum wallboard is older than most houses that have it, since USG dates its Sheetrock panel to 1917 (USG), but the postwar building boom is what put it in nearly every house. Many Duluth and Superior homes have both, from later remodels.

Four checks settle it. Remove a switch plate and look at the cut edge: plaster is a thick, hard shell, often with wood lath behind it, while drywall shows a paper face over a chalky core. Hold a long level on the wall, because hand-troweled plaster has gentle waves and drywall is flat except at taped seams. A thumbtack sinks into drywall with thumb pressure and stops hard against plaster. From an unfinished attic or basement, wood lath shows as rows of thin strips with plaster blobs squeezed between them. Our lath and plaster versus drywall guide shows each test.

Plaster Repairs That Hold: Washers, Mesh Tape and Shimmed Patches

A bulge is the one to take seriously, because it means the keys holding the plaster to the lath have broken, and on a ceiling gravity eventually wins. A loose area surrounded by sound plaster is screwed back with plaster washers, then taped and skim-coated. When most of a ceiling is loose, new drywall screwed through the plaster into the joists avoids the tear-out, as long as the added layer does not crowd the trim. Our ceiling repair page covers the water-damaged and sagging ones.

Holes get plaster or drywall brought out to the wall's thickness, because standard half-inch drywall sits below the surface of a wood-lath plaster wall. The seams are taped with mesh and setting compound, then feathered wide, and the final skim follows the waves of the old wall.

A patch that is flatter than the wall around it shows once painted, so we plan on painting the whole wall corner to corner. Water-damaged plaster is judged after the leak is fixed and the wall dries: plaster that stays hard can often stay, and soft or powdery plaster is cut back. Plaster that is fine but only needs the walls refreshed goes to our painting page.

Lead Paint, Asbestos and the Dust Old Plaster Makes

Old plaster walls carry old paint, and sanding, scraping or cutting that paint makes dust. In a pre-1978 house we flag the painted surfaces before quoting, we keep the work area contained, and a certified renovation firm handles any work the EPA lead rule covers (EPA). Wisconsin runs its own version for houses in Superior, set at more than 6 square feet of painted surface disturbed in one room (Wisconsin DHS), which a cut-out crack can reach.

The NPS brief adds that dust from demolished plaster can also carry asbestos, used as an additive in the mid-twentieth century. If a plaster or joint-compound surface is suspect, it is tested by a certified inspector before anyone cuts it, and a licensed abatement firm handles a positive result. Keep kids and pets out of the room, and call us before you scrape a ceiling yourself.

Repair, Replace or Call a Specialist? Plaster Decisions

Most plaster problems are repairs. Find your symptom in the first column, and the last column says who does the work.

Plaster decisions: common symptoms in Duluth and Superior homes, the usual fix, and who does the work.
What you're seeingLikely causeUsual fixWho handles it
Hairline cracks across a wallSeasonal movement in otherwise sound plasterFill, or tape the ones that keep reopening, then skimUs
Diagonal crack from a door or window cornerStress in the framing around the openingOpen, mesh-tape and skim; look for a cause if it keeps growingUs; a structural concern goes to an engineer
Bulge that moves or crunches when pressedBroken keys: plaster has let go of the lathPlaster washers into the lath, then tape and skimUs
Brown stain, soft or powdery plasterA leak from a roof, bath or pipe aboveFix the leak, dry the wall, cut back to firm plaster and patchA roofer or plumber first, then us
Plaster over concrete, crumblingMoisture in a masonry wallFind the moisture, then patch with masonry-bonding materialsUs after the moisture source is dealt with
Painted plaster in a pre-1978 housePossible lead paint in old layersPainted surfaces flagged before quoting; no dry scrapingA certified renovation firm for work the EPA rule covers

Why Plaster Is Everywhere in Duluth and Superior Houses

An estimated 43% of Duluth's housing units were built before 1940, against 29% across St. Louis County (2025 Duluth Housing Needs Analysis), and Superior has a lot of older wood-frame houses and duplexes with plaster walls and painted wood trim. Houses that old have been through a century of Lake Superior winters, so the plaster has moved with the framing and most walls have been patched at least once, sometimes with drywall. That is why a close look at what is actually on your wall comes before any quote.

Plaster Repair Rules and Habits by Town

Plaster shows up wherever houses are old, so the useful local facts are how old, what the wall is built on, and which permit line a repair crosses. Duluth's permit line sits at half a sheet of drywall, Superior's at 100 square feet, and the rules for lead paint differ by state. Which office covers your address, and who it requires to pull the permit, is confirmed before a price goes on paper.

Plaster Repair in Duluth, MN Neighborhoods

About 43% of Duluth's homes were built before 1940 (U.S. Census Bureau ACS 2020–2024, via Census Reporter), so plaster is the norm in neighborhoods like Lakeside, platted in 1871 and annexed by Duluth in 1893 (Wikipedia), and West Duluth, where a large share of homes likely predate 1939 (Wikipedia). A plaster repair crosses Duluth's permit line when it affects more than half a sheet of drywall, about 16 square feet (City of Duluth); a crack or a doorknob hole stays far below it, and a ceiling section that has come down can cross it.

Morgan Park is different. U.S. Steel built it as a company town (Wikipedia), and it is known for its concrete houses (Duluth News Tribune). Where plaster sits directly on concrete there is no lath and no stud to screw into, so repairs use materials that bond to masonry, and anything hung on the wall needs masonry fasteners. A photo of the wall edge at a switch plate tells us which wall we are dealing with.

Plaster Repair in Superior, WI

Superior's housing is old enough for plaster to be common: 36% of homes predate 1940 (U.S. Census Bureau ACS 2020–2024, via Census Reporter). The City of Superior exempts drywall or plaster repair under 100 square feet from permits, unless the damaged wall is part of a required fire separation (City of Superior), as the wall between an attached garage and the house is.

Wisconsin's lead renovation rule applies once interior work disturbs more than 6 square feet of painted surface in a room in a pre-1978 home (Wisconsin DHS), which a cut-out plaster crack can reach, and it covers rentals. We flag painted surfaces before quoting.

Plaster in Proctor and Cloquet

Proctor has older housing too: 26% of homes predate 1940 (U.S. Census Bureau ACS 2020–2024, via Census Reporter), and it can mix plaster and drywall on one street. Cloquet lost much of its housing in the October 1918 fire (Wikipedia), yet 27% of its homes date from before 1940 (Census Reporter), so older walls there are often plaster, some already patched with drywall. Matching those patches means shimming new board to the plaster's thickness before taping, which is why we look at the old repair as well as the new damage.

Plaster Repair in Two Harbors

Two Harbors has housing as old as Duluth's, with 42% of homes built before 1940 (U.S. Census Bureau ACS 2020–2024, via Census Reporter), so plaster walls and ceilings are part of most repair lists there. The wet winters on the North Shore make water damage the usual reason a plaster ceiling loosens. The leak gets fixed by the right trade first, the wall dries, and then the plaster is judged: hard plaster often stays, soft or powdery plaster is cut back to firm material before any patch.

Unsure who issues permits where you live? The Minnesota and Wisconsin office lists cover each town's office, its phone number and what it exempts from a permit.

How the Plaster Repair Quote and Job Run

What to Send for a Plaster Repair Quote

Send a close-up of the crack or bulge with a coin or tape measure beside it, plus a wider shot of the whole wall or ceiling. Tell us the year the house was built, whether the plaster is smooth or sandy, and whether water has ever reached it. A photo of a switch plate with the cover off helps us tell wall types apart from a distance. If a ceiling is bulging, send the photo from the doorway and stay out from under it.

Before requesting a quote, include: A close-up and a wide shot of the wall or ceiling; The year the house was built and past leaks; A photo of the wall edge with a switch plate off. The repair-list planning guide has a simple method for gathering these details.

How a Plaster Repair Job Works

  1. Send the details. Use the quote form, or call or text (715) 919-7956, and include photos and rough measurements for the plaster repair job.
  2. Get a flat written quote. The quote is one flat price in writing, and a visit, if the job needs one, costs $95 and is waived once you approve the work.
  3. Pick a day. The schedule follows your calendar, not ours.
  4. Work done, then a walkthrough. The last step is a walkthrough of the finished plaster repair work; the workmanship is guaranteed in writing, and if it fails we return and redo it at no charge.

Plaster Repair Questions

What is the difference between lath and plaster and drywall?

Lath and plaster is a wall built up in wet layers over wood strips or gypsum panels, while drywall is a factory sheet screwed to the studs. Plaster over wood lath was built up about 3/4 to 7/8 inch thick, so it is heavier, harder and thicker than a sheet of drywall (NPS Preservation Brief 21). Plaster cracks in lines and lets go of the lath; drywall cracks at seams and fastener heads.

What does plastered drywall mean, and is it repaired like plaster?

It usually means one of two things: veneer plaster, a thin coat of real plaster over gypsum panels the size of drywall, often blueboard, or a drywall wall that was skim-coated. Both are repaired more like drywall than like lath and plaster, with tape and compound or a veneer-type skim. We take off a switch plate and look at the edge before deciding which you have, because the wrong patch shows.

Does an old plaster wall have to be torn out before it can be repaired?

No. Most cracked or loose plaster is repaired in place. Cracks are opened, taped and skim-coated, and loose sections are screwed back to the lath with plaster washers. Where a section has failed, we cut back to sound edges and fill it with drywall shimmed out to the plaster's thickness. Tear-out makes sense when plaster is loose across most of a wall or has been soaked for a long time and the lath is rotted.

Why do my plaster cracks keep coming back?

Because a crack that keeps moving needs its cause dealt with, not more filler. Wood lath swells and shrinks with humidity, framing shifts around door and window openings, and seams between rock-lath panels show through as regular lines. We tape the crack with mesh and skim it, which holds better than filler, and we tell you if the crack suggests a structural cause that should be looked at before any finish goes on.

Is lead paint a concern when repairing plaster in an older home?

It can be, with precautions. Paint on old plaster may be lead-based, and the EPA's lead rule covers paid work that disturbs painted surfaces in a pre-1978 home, so a certified renovation firm handles that work (EPA). On those houses we flag painted surfaces before quoting, and a certified renovation firm handles any work the EPA lead rule covers. Mid-century plaster dust can also contain asbestos, so suspect material is tested first.

Can plaster and lath walls hold shelves and a TV?

Yes, if the fasteners reach the studs or other solid framing behind the plaster. Anchors set in the plaster alone can crumble it or pull out. We find the framing with a magnet and test holes, pilot-drill the plaster so it does not crack, and fasten into studs. Our guide to hanging shelves and TVs on plaster walls shows the fastener we use for each wall type.

How can I tell if my walls are plaster or drywall?

Take a switch plate off and look at the cut edge. Plaster is a thick, hard shell, often over wood lath, with gentle waves across the wall, and a thumbtack stops hard against it. Drywall shows a paper face over a chalky core, is flat except at the seams, and takes a thumbtack with thumb pressure. A house built before about 1940 is likely plaster; many Duluth and Superior homes have both. Send us the photo and we will confirm.

These answers also sit in the Plaster Repair section of our FAQ, alongside questions on pricing, scheduling and coverage.

Our Service Area: Towns and Neighborhoods

The same plaster repair service covers every town listed here, from the Twin Ports out to the small communities beyond.

Duluth neighborhoods:

Superior neighborhoods:

Outside these cities? The surrounding town notes list the other communities we serve for plaster repair work, and the Minnesota and Wisconsin town guides have a project checklist for each. The cost guide and pricing page cover budget and the quote process.

Town checklists for plaster repair projects

Project notes for towns across the service area:

Cracked or Bulging Plaster? Send a Photo

Send a close-up of the damage and a wider shot of the wall, and tell us when the house was built. We will tell you what the wall is and put a flat price in writing before any work starts.

Prefer to text? Text (715) 919-7956

  • $95 visit fee, waived when you approve the work
  • Same price across the service area
  • Insured, background-checked staff