Baseboard & Trim Repair in Duluth, MN & Superior, WI
Baseboard that has pulled loose, casing with split corners, open crown joints and swollen trim, repaired or replaced to match what the house already has. Photos first, then one flat price.
Prefer to text? Text (715) 919-7956 · $95 visit fee, waived when you approve the work
Twin Ports Contracting & Repair repairs and installs baseboard, shoe molding, casing and crown molding in Duluth, MN and Superior, WI, and matches old trim profiles in older houses. Each job is priced from photos or a visit as one flat written quote you approve first, and the visit fee is waived when you approve the work.
| Typical jobs | loose or pulled-away baseboard, baseboard replacement, shoe molding and quarter round, door casing repair |
|---|---|
| Where we work | Duluth, MN, Superior, WI and the surrounding towns |
| Visit charge | $95 when a visit is needed, waived once you approve the work; no mileage charge. |
| First step | Call or text (715) 919-7956, or send photos through the quote form. |
Updated by Twin Ports Contracting & Repair, Duluth, MN
Trim Is Where the Whole Room Shows Its Age
Twin Ports Contracting & Repair repairs and installs baseboard, shoe molding, door and window casing and crown molding in Duluth, MN and Superior, WI. You get one flat written quote you approve first, and our visit fee is waived when you approve the work. Trim covers the joint between two surfaces that never quite agree, so it is the first thing to show a house moving: a gap where the baseboard meets a plaster wall, a miter that has opened at the corner, a casing split above a door, a bottom edge swollen from a wet mop or a leak. Most of it is a repair, not a replacement.
A trim visit starts by finding out what is moving and why. A gap from dry winter air is handled differently than a gap from a wall that is bowing, and a swollen board is a moisture question before it is a trim question. Then we repair the piece, match the profile you already have as closely as it can be matched, and fill, caulk and prime it for paint.
What Our Baseboard & Trim Repair Work Covers
- Loose or pulled-away baseboardRe-fastened into the framing behind the drywall
- Baseboard replacementCut, coped and scribed to uneven walls
- Shoe molding and quarter roundCovers the floor gap, set after flooring
- Door casing repairSplit corners, loose legs, damaged heads
- Window casing, stool and apronRot and cracks cut out and spliced
- Crown molding repairOpen joints re-glued, damaged runs spliced
- Crown molding installationCoped inside corners, tight outside miters
- Water-swollen trimReplaced with moisture-resistant material
- Open miters and gapsRe-fit, filled and caulked flexibly
- Chair rail and picture railReset or replaced along the wall
- Stair skirt boards and returnsLoose or missing trim re-set
- Matching old trim profilesSalvage, stock and built-up molding combinations
Common Baseboard & Trim Repair Projects
| Project | What's included | Good to know |
|---|---|---|
| Baseboard repair | Loose runs re-fastened, dents filled, a damaged length spliced and caulked | A splice in painted trim disappears; in stained wood it needs a closer match |
| Casing repair | Door or window casing re-set, split corners glued, damaged pieces replaced | Casing hides the gap around a frame, so check the frame behind it too |
| Crown molding | Opened joints re-glued, damaged sections replaced, new runs coped and nailed | Inside corners are coped so they stay closed as the wood moves |
| Trim after new floors | Shoe molding or quarter round set once the flooring is down | Hard floors go in first; baseboard and shoe cover the gap |
Baseboard Repair or Replacement: What Decides It
The material decides most of it. Solid wood trim can be spliced, sanded and re-painted almost indefinitely, which is why a damaged length in an old house is cut out and matched rather than the room being stripped. MDF is different: once water gets into its edge it swells and does not shrink back, so a soaked MDF baseboard is replaced. In a basement or bathroom, PVC trim never swells and paints like wood, while MDF is the one to avoid anywhere the floor can get wet.
Walls decide the rest. On old plaster the baseboard rarely sits flush, so it is scribed to the wall and the floor rather than cut square, and the nails have to find framing behind the plaster. Layers of old paint can also fill in the profile, and sometimes the better answer is a new piece in the same shape. If trim is loose because the wall behind it is crumbling, we say so and point you to drywall and plaster repair first.
Trim Gaps From Winter Humidity Swings
Winter in the Twin Ports means a furnace running for months, and the air inside gets very dry. Wood gives up moisture and shrinks across its width: miters open at corners, casing pulls from the wall, crown shows a hairline at the ceiling, and baseboard lifts away from an uneven plaster surface. Painted joints crack because caulk that was rigid cannot follow the movement. Many of these gaps close again in humid weather, so a repair done in the middle of winter can look fine in July and gap again by February.
That is why the repair is built for movement. We fasten into studs and joists rather than the wall surface, glue and cope the joints that can be glued and coped, and finish with a flexible paintable caulk, not a hard filler. In a house where trusses lift the ceiling in the cold, crown is fastened to the ceiling only. If a gap stays open or grows past what a season explains, the cause is probably a moving wall or floor, and we look at that instead of caulking it again. Our home repairs page covers the other small fixes that come with the dry months.
Crown Molding, Casing and Matching Old Duluth Trim
Crown molding covers the joint where wall meets ceiling. Inside corners are coped, with one piece run square into the corner and the other cut to its profile, because a coped joint stays closed as the wood moves, while an inside miter tends to open. Outside corners are mitered and glued. Old plaster ceilings are rarely flat, so gaps are scribed or caulked, and long runs are nailed into the top plate and joists. Our crown molding guide goes through the profiles and sizes for different ceiling heights.
Matching is the other half of the job. A house in Duluth or Superior built a century ago often has fir or oak casing and tall baseboard that cannot be bought off a shelf. We salvage original pieces, combine stock moldings and sometimes have a profile milled. On a pre-1978 house, the trim is probably painted with lead paint somewhere in its history, so we flag the painted surfaces first, and a certified renovation firm handles work the EPA lead rule covers (EPA).
Trim Problems: Repair, Replace or Look Deeper?
Most trim problems are movement and moisture. Match the symptom to the cause before choosing the fix.
| What you're seeing | Likely cause | Usual fix | Who handles it |
|---|---|---|---|
| Gaps at miters and along the wall in winter | Wood shrinking in dry heated air | Re-fasten into framing, fill, flexible caulk | Us |
| Baseboard swollen along the bottom edge | Water from a leak, mop or wet floor | Replace the section in moisture-resistant trim; find the leak | Us; a plumber if a pipe is leaking |
| Casing split above a door or window | Frame shifted or the head was nailed too tight | Glue and re-set, or replace the piece | Us |
| Trim pulling away and the wall crumbles behind it | Failing plaster or drywall | Repair the wall first, then re-set the trim | Us |
| Old profile no longer sold | Original trim from an older house | Salvage, stack stock moldings or have a profile milled | Us |
| Painted trim in a pre-1978 house needs sanding | Possible lead paint | Flag the surfaces before quoting; lead-rule work handled by a certified renovation firm | A certified renovation firm for covered work |
Why Trim Moves in a Northland House
A Duluth or Superior house goes through a big swing in humidity every year: damp summers, then a furnace that dries the air for months. Wood trim shrinks and swells with it, and a plaster wall behind it is rarely flat to begin with. That is why a repair here is built to move a little: nails go into framing, joints are coped or glued, and caulk is the flexible, paintable kind. Rigid fixes crack again the first dry January.
Trim Work Around the Twin Ports
Trim is some of the least regulated work in a house, but the houses it goes into vary a lot. A plaster-walled Duluth bungalow, a 1990s Hermantown house on roof trusses and a Superior frame house each move differently through the year, and each leaves a different gap behind a baseboard. Here is how the permit lines and the house age change the job from town to town. We check what your address needs before we quote.
Baseboard and Trim Work in Duluth, MN
Duluth exempts painting, papering, tiling, carpeting, cabinets and countertops from a building permit (City of Duluth), and trim is finish work of that kind; an alteration affecting more than half a sheet of drywall does need one (City of Duluth). So re-setting casing or running new baseboard is not a permit job, while a repair that opens a wall is worth a call first.
The house age is what changes the trim work. An estimated 43% of Duluth's homes were built before 1940 (U.S. Census Bureau ACS 2020–2024, via Census Reporter), and a large share of homes in West Duluth likely predate 1939 (Wikipedia). That means tall fir or oak baseboard on plaster walls that are not flat, so we scribe and cope instead of cutting square. Old trim has often been painted for decades, so on a pre-1978 house we flag painted surfaces before quoting, and a certified renovation firm handles any work the EPA's rule covers (EPA).
Baseboard and Trim Work in Superior, WI
Superior's Permits Not Required list names interior trim as exempt (City of Superior), along with a built-in cabinet or bookcase and drywall or plaster repair under 100 square feet that isn't part of a required fire separation. That last limit matters on an attached-garage wall, where patching trim and drywall means rebuilding the fire-rated wall. Elsewhere in the house, trim goes ahead without a permit, though the list also says lead-safe practices may be required on older homes.
Trim Work in Hermantown and Proctor
Hermantown's homes are young by Twin Ports standards, with a median build year of 1993 against 1951 in Duluth (U.S. Census Bureau ACS 2020–2024, via Census Reporter). Trussed roofs are usual in houses that age, and a truss lifts the ceiling in a cold snap, which opens the joint at the top of crown molding and can leave a gap against the wall below it.
Fastening the crown to the ceiling only, so it slides on the wall, is the fix that lasts. Proctor sits between: 26% of its homes predate 1940 and the median build year is 1968 (U.S. Census Bureau ACS 2020–2024, via Census Reporter), so one house can have both old plaster and newer drywall.
Trim Work in Cloquet
The October 1918 fire destroyed much of Cloquet (Wikipedia), and 27% of its homes date from before 1940 (U.S. Census Bureau ACS 2020–2024, via Census Reporter), so a lot of the older trim likely went in during the rebuilding and is worth matching. The city requires permits for structural changes, windows and siding (City of Cloquet), but trim repair is not on that list. Where a casing repair turns up rot at the window frame itself, that becomes window work and is checked with the city first.
Every town sets its own rules for baseboard & trim repair work. The Minnesota and Wisconsin permit office lists show which office to call and what it exempts.
How the Baseboard & Trim Repair Quote and Job Run
What to Send for a Trim Repair Quote
Photos and rough measurements get a trim quote moving fastest. Send a wide shot of each room showing the trim, then a close-up of every gap, split or swollen spot, with a hand or ruler in the frame for scale. Say whether the trim is painted or stained, and give a rough length for each run. If you still have a piece from the original trim, or can find a clean cut end in a closet, a photo of its profile from the end is the most useful photo of all.
Before requesting a quote, include: A wide photo of each room's trim, plus close-ups of damage; An end-on photo of the profile and the rough run lengths; Whether trim is painted or stained, and the house's build year. If the list is long, use the repair-list planning guide to sort it first.
How a Baseboard & Trim Repair Job Works
- Send the details. Start with the quote form or a call to (715) 919-7956; photos of the spot help most for baseboard & trim repair.
- Get a flat written quote. The price arrives in writing for you to approve; if the job needs a look first, the $95 visit fee is waived once you approve the work.
- Pick a day. Work is booked for a day that suits you.
- Work done, then a walkthrough. We finish with cleanup and a walkthrough of the baseboard & trim repair work, and we guarantee the workmanship in writing, so a failure means we return and redo it at no charge.
Baseboard & Trim Repair Questions
Can damaged baseboard be patched, or does the whole room need new trim?
Usually a patch works. Loose baseboard gets re-nailed into the framing, dents and gouges are filled and sanded, and a split or soaked section is cut out and replaced with a matching piece, then caulked and painted. Whole-room replacement makes sense when the profile is gone, the paint is so thick the detail has filled in, or water has swollen the board along most of a wall. We look at the worst run first and quote what it actually needs.
Why do gaps open between my baseboard and the wall every winter?
Because heated winter air is dry, and wood trim shrinks as it loses moisture. Baseboard, casing and crown pull back at their joints, and a plaster wall that is not flat shows the gap more. The gaps often close again when the air gets humid. A small seasonal gap is best filled with flexible paintable caulk after the heating season settles, while a gap that stays open or widens points to a wall or floor that is moving.
What is shoe molding, and does it go on before or after the flooring?
Shoe molding is the small rounded strip at the foot of the baseboard that covers the gap between baseboard and floor. With hard floors such as vinyl plank, laminate, hardwood or tile, the flooring goes down first and the shoe or baseboard covers the expansion gap along the wall. With carpet, the baseboard goes on first, set a little above the subfloor so the carpet edge tucks under it. We trim around whichever floor is going in.
What if the baseboard profile in my old house is not sold anymore?
A close match can usually be built. We take the original off carefully, compare it to stock profiles and look at stacking two or three standard moldings to reproduce the shape, or reuse trim from a closet or hidden wall to patch the visible run. For painted trim a near-match reads as identical once finished. Stained fir or oak is harder because old wood darkens, so we test the color on a sample before installing.
How do you fix crown molding where a corner has opened up?
First we find out why it opened. A joint that has parted along one wall is often a seasonal gap, so it is re-glued, re-nailed into the framing and caulked flexibly. A corner that was mitered when it should have been coped may be re-cut. In a house whose roof trusses lift the ceiling each winter, fastening the crown to the ceiling only lets it slide on the wall. Our crown molding guide explains the styles.
How long does new baseboard take to put in a room?
Time depends on the room and the walls, because the cutting is the short part and the time goes into removing old trim, coping each inside corner, fitting the trim to walls and floors that are not flat, then nailing, filling and caulking. Painting adds drying time and is often a second visit. Wavy plaster walls in older Duluth and Superior houses take longer than new drywall, and the quote spells out what is included.
Can you repair trim without repainting the whole room?
Often, yes. A splice or filled section is primed and painted only as far as it takes to blend, and caulk lines are painted over in the same pass. The catch is color: a wall painted years ago may not match fresh paint exactly, so we say whether the patch will show and whether painting the whole run or wall gives a cleaner result. The quote lists painting as its own line, so you choose how far it goes.
These answers also sit in the Baseboard & Trim Repair section of our FAQ, alongside questions on pricing, scheduling and coverage.
Where We Work: Our Service Area
Baseboard & trim repair work is not limited to the big cities; the towns below are all in our service area.
Duluth neighborhoods:
Superior neighborhoods:
Looking for baseboard & trim repair help outside Duluth and Superior? The surrounding town notes and the Minnesota and Wisconsin town guides cover the rest, and the cost guide helps with budget.
Town checklists for baseboard & trim repair projects
Project notes for towns across the service area:
Services That Pair With Baseboard & Trim Repair Work
Get the Trim Tight Again
Send photos of the gaps, damaged runs and the profile you have now, and we'll put a flat price in writing before any work starts.
Prefer to text? Text (715) 919-7956
- $95 visit fee, waived when you approve the work
- Same price across the service area
- Insured, background-checked staff