TV Mounting in Duluth, MN & Superior, WI
Your TV on the wall, level, on the framing and not on plastic anchors, with the cords tidied and the holes explained before we drill. We work out what the wall is made of first, then quote the mount as one flat price.
Prefer to text? Text (715) 919-7956 · $95 visit fee, waived when you approve the work
Twin Ports Contracting & Repair mounts TVs in Duluth, MN and Superior, WI on studs, plaster, brick and block, over fireplaces and with low-voltage cords hidden. Our planning range is $100–$220 for labor, and every job gets one flat written quote you approve first.
| Work included | fixed and tilting mounts, full-motion arms, plaster and lath walls, brick and concrete block |
|---|---|
| Where | Duluth, MN, Superior, WI and the surrounding towns |
| Visit charge | $95 when a visit is needed, waived once you approve the work; no mileage charge. |
| Getting started | Call or text (715) 919-7956, or send photos through the quote form. |
Updated by Twin Ports Contracting & Repair, Duluth, MN
The Wall Decides the Job, Not the Bracket
Twin Ports Contracting & Repair mounts TVs in Duluth, MN and Superior, WI, and the bracket is the easy part. What matters is what is behind the surface you are looking at: drywall over studs, plaster over wood lath, brick, concrete block or a chimney breast. Our planning range for TV-mounting labor is $100–$220, with the bracket extra if you do not have one, and the written quote you approve is the real number. See the TV mounting cost guide for what moves it.
A visit starts with the TV model and the spot you have picked. We find the framing, hold the screen up at the height you are considering so you can check it from the couch, then choose the fixed, tilting or full-motion bracket that suits the wall and the weight. A full-motion arm levers the whole TV away from the wall, so it goes into framing or solid masonry and nothing else. Our visit fee is waived when you approve the work.
What Our TV Mounting Work Covers
- Fixed and tilting mountsLagged into studs, leveled and checked
- Full-motion armsTwo-stud layouts for heavy swing-out screens
- Plaster and lath wallsStuds found, plaster pilot-drilled slowly
- Brick and concrete blockMasonry anchors set in sound material
- Above a fireplaceClearance and heat checked before drilling
- Mounting boardsBacker across two studs where none line up
- Low-voltage cord hidingHDMI and cable run inside the wall
- Paintable cord racewaySurface channel when the wall stays whole
- Soundbars and shelvesHung under the screen or beside it
- Removing an old mountHoles filled, sanded and touched up
- Replacing a sagging mountPlastic-anchor installs moved onto framing
- Move-in mountingTV, shelves and curtain rods in one visit
Common TV Mounting Projects
| Project | What's included | Good to know |
|---|---|---|
| Drywall over studs | Bracket lagged into two studs, TV hung and leveled | The simple case; cords left visible or in a raceway |
| Plaster over lath | Studs found by magnet and test holes, plaster pilot-drilled | Slower drilling so the plaster does not crack off the lath |
| Brick, block or stone | Hammer drill and masonry anchors in sound masonry | Soft or crumbling mortar is avoided; the screws go into brick |
| Above a fireplace | Clearance and heat check, then a fixed or pull-down mount | A pull-down mantel mount often fits the neck better |
| Hidden cords | Low-voltage cables routed behind the wall, plates fitted | A new outlet behind the screen is a licensed electrician |
A TV mounting price starts with photos and measurements. The cost guide gives rough ranges, and the estimator adds up a list before you ask for a quote.
For local prices, see the TV mounting cost guide.
Studs, Plaster, Brick and Block: What Holds the TV
Mount makers are blunt about this. One widely sold wall mount's manual says it is designed only for wood studs, solid concrete or concrete block, that drywall alone will not hold the TV, and that the wall must support five times the combined weight of the TV and mount (SANUS manual). Follow your own mount's instructions, because they set the rule. That is why the first job on any visit is finding framing: two studs for most brackets, centered on the screen if we can, and a backer board across more studs when the picture needs to sit where the studs do not.
Each wall type changes the method, not the standard. Plaster takes a magnet, test holes and slow drilling. Brick takes a hammer drill and anchors set in sound brick, never in crumbling mortar. Block takes sleeve or wedge anchors, and a hollow block core gets the right anchor for a hollow core. An old mount that sags or hangs on plastic anchors comes down, the holes are patched, and the new bracket goes where it should have been in the first place.
Hiding Cords: What We Do and What Needs an Electrician
A clean wall comes from three separate choices. Cables for video and audio, which carry low voltage, can run inside the wall behind a pair of plates, or in a paintable raceway when you want no cutting. The power cord is different. Tucking it inside the wall means a new outlet behind the screen, and a new outlet or circuit is permit work in Duluth (City of Duluth), done by a licensed electrician under an electrical permit. We leave that to them and plan our work around it.
Building or finishing a basement? Say so before the drywall goes up, because blocking behind the screen and an outlet roughed in at the right height cost almost nothing at that stage. Basement finishing is the easiest time to plan the TV wall, and a soundbar, a shelf for a streaming box or a pair of speakers can all be hung on the same backing in the same visit.
Height, Soundbars and Keeping Kids Safe
Put the center of the screen at roughly seated eye level; for many couches that lands near 42 inches off the floor. Over a fireplace the picture usually ends up higher, so we hold the TV in place at your chosen height before drilling and you check it from the seat. A soundbar goes under the screen on its own bracket, and a shelf for a game console or cable box is better backed into the same studs than hung on drywall anchors.
Where a TV is not going on the wall, the Consumer Product Safety Commission's Anchor It campaign urges families to secure TVs and furniture so they cannot tip over (CPSC). A sturdy low base, set well back, with the TV strapped to its stand if the stand allows it, is the fallback. See assembly and mounting for anti-tip anchoring of dressers and bookcases.
Which Wall? TV Mounting Decisions by Wall Type
The wall sets the fastener and the time. Find yours in the table, and note the rows that go to an electrician or to a repair first.
| Your wall | What it needs | How we mount it | Who handles it |
|---|---|---|---|
| Drywall over wood studs | Two studs under the bracket | Lag bolts into the studs, leveled and checked | Us |
| Plaster over lath | Studs found by magnet and test holes | Pilot-drill the plaster slowly, lag into studs | Us; loose or hollow plaster is repaired first |
| Brick, block or a chimney breast | Sound masonry, not soft mortar | Hammer drill and masonry anchors | Us |
| Drywall with no studs where the TV goes | Framing across the spot | Mounting board across two studs, or a wide-plate mount | Us |
| Fireplace wall | Heat and clearance checked | Fixed or pull-down mantel mount on framing or masonry | Us |
| Want the power cord inside the wall | An outlet behind the TV | New outlet and wiring on an electrical permit | A licensed electrician under an electrical permit |
Why Twin Ports Walls Need a Plan Before the Drill
Duluth and Superior mix wall types more than most places: plaster over lath in the older frame houses, concrete in Morgan Park and drywall in the newer subdivisions. On a hillside house the wall you want can also sit a full story above the ground on the back side, so we plan the ladder as well as the bolt. Come late August, UMD, CSS and UWS move-ins fill the calendar, and mounting is the job that gets packed in with beds and shelves. Our Duluth and Superior pages show where we work.
TV Mounting by Town: Walls and Outlets in the Twin Ports
The bracket is the same everywhere. What changes between Duluth, Superior and the towns around them is the wall it goes on and who has to sign off if you want a new outlet behind the screen. Here is what we see by place, with the source for each rule. Wiring is always a licensed electrician under an electrical permit; the TV, the cords and the holes are ours.
TV Mounting in Duluth, MN
An estimated 43% of Duluth's housing was built before 1940 (Maxfield Research for the City of Duluth), and houses that age usually have plaster over wood lath. A stud finder reads poorly through it, so we use a magnet and test holes, drill slowly and let the lag bolts carry the TV. In Morgan Park, known for its concrete houses (Duluth News Tribune), the bracket goes on with masonry anchors, so tell us the wall type when you text.
A new outlet behind the TV is not our work. The City of Duluth lists new outlets and circuits among the work that needs a permit (City of Duluth), so that part belongs to a licensed electrician under an electrical permit, scheduled before or after our mounting visit as you prefer.
TV Mounting in Superior, WI
Superior has older frame houses with plaster walls, so the first question is always which room. Hanging the TV itself needs no wiring. Anything electrical is a different path: the city's Building Permits page is where electrical permits are handled (City of Superior), and a new outlet there is a licensed electrician's job on that permit. In the Village of Superior and the Douglas County towns, confirm the local inspector with the electrician.
TV Mounting in Hermantown and Proctor
Hermantown homes are much newer, with a median build year of 1993 against 1951 for Duluth (Census Reporter), so the wall is far more likely drywall over studs, where a stud finder works and the bracket lags straight into framing. That is the simple case: cords left in a raceway or run through low-voltage plates. In Proctor, where the age of the house varies, we ask the wall type first and use the plaster method if it turns out to be plaster.
TV Mounting in Cloquet and Esko
In Esko and Harney, the Town of Thomson issues building permits while electrical permits go through the state inspector (Town of Thomson), so a new outlet there is again an electrician's job on a state permit. In Cloquet and Two Harbors the wall question comes first, as everywhere: send a photo and the TV model, and we will tell you what we would use before anyone drives out.
The office that governs TV mounting work changes from town to town; the Minnesota and Wisconsin permit lists name it, with a phone number and the exemptions it allows.
How the TV Mounting Quote and Job Run
What to Send for a TV Mounting Quote
A text with three things is usually enough: the TV model or size, a photo of the wall where it will hang, and what you want done with the cords. If you know what the wall is made of, say so; if you are not sure, a photo of the wall edge near a door or window often shows plaster thickness or brick. Bring your own mount or ask us to list one on the quote. Wiring for a new outlet is a separate electrician's job.
Before requesting a quote, include: TV model or size, and the mount if you have one; A photo of the wall and the planned spot; Cord plan: visible, raceway or low-voltage in-wall. Gathering these takes a few minutes; the repair-list planning guide shows an easy order to do it in.
How a TV Mounting Job Works
- Send the details. Call (715) 919-7956 or use the quote form; a short description of the TV mounting job and a few photos are enough to begin.
- Get a flat written quote. Nothing begins until you approve the written quote, and the $95 fee for any visit is waived when you do.
- Pick a day. Once the quote is approved, you set the day.
- Work done, then a walkthrough. We clean up and go over the finished TV mounting work with you, and the workmanship is guaranteed in writing: if it fails, we return and redo it at no charge.
TV Mounting Questions
Is it safe to mount a TV above a working fireplace?
Often yes, but only after checking how hot the wall gets and how high the screen will end up. Heat rises from a fire, and a TV's maker sets its own limits on temperature, so we read the TV's manual and measure the clearance above the opening before any hole is drilled. Height matters too: a screen far above eye level strains the neck, which is why a pull-down mantel mount is the usual fix.
What if there are no studs where I want the TV to hang?
There are fixes that still land in framing. A mount with a wide plate or sliding rail can reach two studs, or a mounting board can be fastened across the studs and the bracket put on the board. A light TV on a fixed mount may use hollow-wall anchors only where the bracket's own instructions allow them. Full-motion arms always go into framing or masonry, never into drywall alone.
How do you hang a TV on an old plaster and lath wall?
We find the studs behind the plaster with a magnet and small test holes, since electronic stud finders read poorly through lath. Then the plaster is pilot-drilled slowly so it does not break loose, and the lag bolts go into the studs. The plaster only holds the bracket's face; it never carries the weight. Our guide to hanging shelves and TVs on plaster shows the fastener for each wall type.
Can you hide the cords for a wall-mounted TV?
Yes, the low-voltage ones. HDMI and similar cables can run inside the wall through recessed plates, or sit in a paintable raceway if you would rather not cut the wall. Hiding the power cord the same way usually needs a new outlet behind the screen, which is new wiring: a licensed electrician under an electrical permit. We mount the TV and tidy the cables, and the electrician handles the outlet.
Can I mount a TV in a rental and patch it when I move out?
Maybe, if the lease allows it. Read the alterations clause and get your landlord's OK in writing before you buy the mount. A stud-mounted bracket leaves four to six lag-bolt holes, which are filled, sanded and touched up at move-out. If the answer is no, a sturdy low stand with the TV set well back, and cords kept out of reach, is the renter-friendly route.
Do the screws that come with a TV mount fit every TV?
Not always. The hole pattern on a TV's back follows the VESA standard (VESA mount), but thread size and allowed bolt length vary by model, so check the TV's manual. Mounts ship with assorted bolts and spacers for curved or recessed backs. A bolt that is too long can bottom out inside the set and damage it, so a bolt that will not turn easily gets stopped, not forced.
How long does it take to mount a TV?
About an hour for a standard mount on drywall with the cords left in a raceway or visible. Plan on two to three hours for an in-wall low-voltage cord kit, a masonry or over-the-fireplace install, or a heavy full-motion arm. We bundle it with shelves, curtain rods or other wall work in the same visit, and the written quote spells out what is included.
These answers also sit in the TV Mounting section of our FAQ, alongside questions on pricing, scheduling and coverage.
Our Service Area: Towns and Neighborhoods
Looking for TV mounting help near you? Start with your town in the list below.
Duluth neighborhoods:
Superior neighborhoods:
Don't see your town? The surrounding town notes cover the rest of the area for TV mounting jobs, and the Minnesota and Wisconsin town guides give a checklist for each one.
Town checklists for TV mounting projects
Project notes for towns across the service area:
Services That Pair With TV Mounting Work
Send Us the TV and the Wall
Text the TV model, a photo of the wall and where you want the screen. We will tell you the wall type, the mount we would use and a flat price in writing before any drilling.
Prefer to text? Text (715) 919-7956
- $95 visit fee, waived when you approve the work
- Same price across the service area
- Insured, background-checked staff