Deck Resurfacing in Duluth, MN & Superior, WI
Worn-out decking pulled off and replaced with new boards over a frame that passes inspection, in wood or composite. If the frame fails, we tell you before a board goes down.
Prefer to text? Text (715) 919-7956 · $95 visit fee, waived when you approve the work
Twin Ports Contracting & Repair resurfaces decks in Duluth, MN and Superior, WI: old boards off, the frame checked and repaired, new wood or composite on top, with stairs and railing as needed. Each resurface is priced from photos and a frame check as one flat written quote you approve first, and a failing frame is shown to you before any boards go down.
| Covers | full board replacement, pressure-treated and cedar re-decking, composite and pvc re-decking, frame inspection before quoting |
|---|---|
| Service area | Duluth, MN, Superior, WI and the surrounding towns |
| Visit fee | $95 when a visit is needed, waived once you approve the work; no mileage charge. |
| How to start | Call or text (715) 919-7956, or send photos through the quote form. |
Updated by Twin Ports Contracting & Repair, Duluth, MN
New Boards Are Only Worth It on a Good Frame
Twin Ports Contracting & Repair resurfaces decks in Duluth and Superior: the old boards come off, the frame gets checked and any weak spot repaired, and new decking goes down in wood or composite. Resurfacing is priced from photos and a frame check as one flat written quote you approve first, since the size of the deck, the board you choose, the stairs and the railing all change it. The $95 visit fee is waived when you approve the work, and there is no mileage charge.
The frame decides everything. New boards screwed down onto rotted joists or a failing ledger look good for a season and then sag, so we check the posts, beam, joists, ledger and footings before quoting. If the structure is sound, resurfacing costs far less than a rebuild and gives you a deck that looks new. If it is not, you get photos and a straight answer, with the structural repair or a rebuild priced separately.
What Our Deck Resurfacing Work Covers
- Full board replacementOld decking removed, new boards fastened
- Pressure-treated and cedar re-deckingWood boards, gapped for drying and swelling
- Composite and PVC re-deckingBoards spaced to the maker's installation guide
- Frame inspection before quotingPosts, beam, joists, ledger and footings probed
- Joist repair and levelingWeak joists sistered, high and low spots shimmed
- Extra joists for compositeAdded where spacing is too wide for the boards
- Ledger flashingWater kept out from behind the house wall
- Stair tread and riser replacementNew treads on sound stringers
- Railing replacementRebuilt to the city's current guard rule
- Fascia and picture-frame bordersBoard ends and edges finished clean
- Frost-heaved footing replacementReplaced below frost depth, deck re-leveled
- Tear-off and haul-awayOld boards bagged, cut and hauled
Common Deck Resurfacing Projects
| Project | What's included | Good to know |
|---|---|---|
| Wood re-decking | Old boards off, frame checked, new wood boards fastened and gapped | Stain after the boards dry; see deck staining |
| Composite re-decking | New composite boards on a leveled frame with joist spacing checked | Joists spaced too wide need extras before the first board |
| Resurface with railing and stairs | New boards, treads and a rebuilt guard in one pass | Guard height and openings follow the city's current rule |
| Frame repair first | Rotted joists, posts or ledger repaired before any boards go on | Structural repair can need a permit; we confirm before quoting |
| Frost-heaved deck | Footings replaced below frost depth and the deck re-leveled | Shimming a shallow footing doesn't stop the next winter's lift |
Budgeting for deck resurfacing work? The cost guide and its estimator show planning ranges; the price you approve comes from photos, measurements, access, materials and the finish.
The Frame Check That Decides a Resurface
Before a quote, we look at the ledger where the deck meets the house, the posts and beam, the joists and the footings. Rot hides at the joist tops under old boards, at post bottoms and behind a ledger with no flashing, so we probe with a screwdriver and show you photos. Joists that are bowed or uneven get shimmed or planed so the new surface is flat, and weak ones are sistered or replaced.
Footings are the Northland question. Frost lifts shallow ones, and a deck that has heaved will rock and slope under new boards just as it did under old ones. Minnesota's code puts footings in this region down at least 5 feet (Minn. R. 1303.1600), and Wisconsin's rule is below frost or 48 inches, whichever is deeper (Wis. Admin. Code SPS 321.16). A heaved footing is replaced, not shimmed, and our guide to frost heave explains why.
Wood, Composite or PVC: Picking the New Boards
Pressure-treated boards are the lowest first cost and take stain, which means a recoat every few years; cedar looks richer and weathers faster without a finish. Composite and PVC skip the staining, but they need correct gaps for drainage and for expansion, and Trex's installation guide sets different end-to-end gaps above and below 40 degrees F (Trex). With a short building season, your deck may well go down on a cool fall day, so the installer has to space for that temperature.
Material is a line on the quote, either supplied by you or sourced by us, and we send the maker's installation guide for your board with the quote. Our guide to decking materials in this climate compares them, and new wood gets its first coat through deck staining after it dries. For the budget side, the deck repair cost guide and deck cost guide show how we price.
When the Frame Fails: Repair or Rebuild
If the check turns up rot in the beam, joists or ledger, the next step is structural repair, which can need a permit; see deck repair, where our planning range for board and railing work is $800–$3,500 and structural fixes are quoted after we have seen the frame. When most of the structure is gone, a new deck is the better value, and our guide on repairing, resurfacing or rebuilding lays out the choice. A full resurface is quoted from photos and the frame check, with no one-size price.
Tearing off old boards brings its own care. A deck built before December 2003 may be made of CCA-treated wood, and EPA advises goggles and a dust mask when sawing it and says never to burn it at home (EPA). That shapes how old boards are cut, bagged and hauled. A new guard and handrail are built to the city's current rule, which we check for your address in Duluth or Superior before work starts.
Refinish, Resurface, Repair or Rebuild? Deck Decisions
The boards, the frame and the footings each point to a different job. Check the frame first, because it decides whether new decking is worth buying.
| What you're seeing | Likely cause | Usual fix | Who handles it |
|---|---|---|---|
| Gray, peeling or blotchy boards that are still solid | Failed finish and sun weathering | Clean, strip and restain; no new boards needed | Us; see deck staining |
| Many boards soft, split or cupped, frame feels solid | Surface wear across the deck | Resurface with new decking | Us |
| A few bad boards, the rest sound | Local rot or damage | Replace the bad boards only | Us; see deck repair |
| Deck bounces, sags or pulls from the house | Failed joists, beam or ledger | Repair the frame first; a permit may apply | Us, after the frame is checked |
| Deck rocks or slopes after winter | Frost lifting shallow footings | Replace footings below frost depth and re-level | Us |
| Frame is rotted through or built wrong | Age, water and poor connections | Tear off and build a new deck | Us; see deck building |
Why Northland Decks Wear Out Boards Before Frames
Snow sits on the boards for months, shovels scrape off the finish and freeze-thaw cycles work every fastener loose, so the surface of a Twin Ports deck usually fails years before the framing under it. Water that gets past a ledger without flashing, and footings that frost has lifted, are what end a deck's life instead. On Duluth's hillside lots, tall downhill posts and long stair runs give water and frost even more to work on. Our pages for handyman work in Duluth and in Superior cover the neighborhoods we work in.
Deck Resurfacing Around the Twin Ports
New decking on an existing frame is a repair in most offices, but the line between boards and structure is drawn a little differently from town to town, and a new railing or stair can bring its own rules. Here is where each office stands, what the age of the housing means for the old boards coming off, and where frost sets the depth of a replacement footing. We check what your address needs before we quote.
Deck Resurfacing in Duluth, MN
Minnesota's code needs no permit for ordinary repairs but excludes removing or cutting a structural beam or load-bearing support (Minn. R. 1300.0120), and Duluth lists decks and structural alterations among work that needs a permit (City of Duluth). New boards over a sound frame are the repair end of that line; new posts, joists or a ledger may not be.
The part that surprises owners is the railing: a resurface that replaces the guard is built to the city's current rule, a 36-inch guardrail on any deck 30 inches above grade with openings a 4-inch sphere can't pass through, and a grippable handrail on at least one side of the stairs (City of Duluth).
Deck Resurfacing in Superior, WI
Superior's Permits Not Required list covers replacing deck floorboards and stair treads and repairing or replacing exterior stair handrails (City of Superior), which is most of a resurface. It does not cover posts, joists, beams or ledgers, so a frame repair that turns up under the old boards goes to the city's building inspection office at (715) 395-7288. The same list notes that lead-safe practices may be required for any listed item, which matters where painted siding behind a ledger has to come off for flashing.
Deck Resurfacing in Hermantown and Proctor
Hermantown's homes are much newer than Duluth's, with a median build year of 1993 against 1951 (Census Reporter), so decks built with the house may predate December 2003, when manufacturers stopped making CCA-treated wood for homeowner uses. EPA advises goggles and a dust mask when sawing that wood and says not to burn it at home (EPA), which shapes how the old boards are cut and hauled.
The city lists a 60-inch minimum frost depth for footings (City of Hermantown). In Proctor, replacing rotten deck boards needs no permit, but a deck can't be closed in as a three-season porch unless it was designed for that load (City of Proctor).
Deck Resurfacing on the North Shore
Inside Two Harbors, a deck attached to a building or more than 30 inches up needs a building permit, with frost footings at least 60 inches deep inspected before concrete, and a ledger fastened to the rim joist or solid blocking with flashing approved for treated wood (City of Two Harbors). A resurface that opens up a bad ledger is rebuilt to that sheet. In Knife River and Larsmont, Lake County's land use permit covers changes to a building's outer dimensions (Lake County), so new boards on the same footprint are one project and a bigger deck is another.
Unsure who issues permits where you live? The Minnesota and Wisconsin office lists cover each town's office, its phone number and what it exempts from a permit.
How the Deck Resurfacing Quote and Job Run
What to Send for a Deck Resurfacing Quote
Photos get a resurfacing quote moving fastest. Send one overall shot of the deck and the house wall it attaches to, then close-ups of the worst boards, the stairs and the railing. If you can see under the deck safely, add photos of the posts, joists and ledger. Give us the rough size, the height off the ground, the age of the deck and whether you want wood or composite. Never crawl under a deck that sags or pulls from the house.
Before requesting a quote, include: An overall photo plus close-ups of boards, stairs and rail; Underside photos of posts and joists, only if safe to take; Rough size, height, age and the board material you want. The repair-list planning guide has a simple method for gathering these details.
How a Deck Resurfacing Job Works
- Send the details. Use the quote form, or call or text (715) 919-7956, and include photos and rough measurements for the deck resurfacing job.
- Get a flat written quote. The quote is one flat price in writing, and a visit, if the job needs one, costs $95 and is waived once you approve the work.
- Pick a day. The schedule follows your calendar, not ours.
- Work done, then a walkthrough. The last step is a walkthrough of the finished deck resurfacing work; the workmanship is guaranteed in writing, and if it fails we return and redo it at no charge.
Deck Resurfacing Questions
Who does deck resurfacing near me in Duluth, Superior and Hermantown?
Twin Ports Contracting & Repair resurfaces decks in Duluth, Superior, Hermantown, Proctor and the towns around them. Text photos of the whole deck and the house wall it attaches to to (715) 919-7956, and we price the resurface after checking the frame. A visit, when needed, is a flat $95 that is waived when you approve the work. The written quote lists the boards, stairs, railing and any frame repair as separate lines.
What is the difference between resurfacing a deck and refinishing it?
Resurfacing replaces the boards; refinishing cleans, strips, sands and stains the boards you already have. If the wood is sound but gray, peeling or blotchy, refinishing through deck staining is cheaper. If boards are soft, split or cupped across most of the deck, no stain will fix them, and new decking is the answer. We tell you which one your deck needs when we look at it.
Can I put composite boards on my old wood deck frame?
Often, if the frame is in good shape and its joists are spaced for composite. Trex says to check the joist spacing and the overall condition of the framing, inspect the hardware and make sure the joists are level and even with each other, shimming or shaving them where needed (Trex). Joists spaced too wide need extra joists first, and rotted ones get replaced before any composite goes down.
How do I know if my deck frame is good enough to resurface?
Probe it. Press a screwdriver into the joist tops, the post bottoms and the board next to the house wall, and photograph anything the point sinks into. A deck that bounces, leans, pulls from the house or has heaved off level is telling you about the frame, not the boards. Send those photos and we check the ledger, footings and joists on site before quoting a resurface, because new boards on a failing frame are wasted money.
Do I need a permit to replace all the deck boards in Duluth or Superior?
Usually not for boards alone, but frame work can. Superior's Permits Not Required list includes replacing deck floorboards and stair treads, and Minnesota's code excludes ordinary repairs from permits but not removing or cutting a structural member (Minn. R. 1300.0120). Duluth lists decks among permit work (City of Duluth), so we confirm what your address needs before we quote.
Should I re-deck with wood or composite in this climate?
It depends on upkeep and budget more than on the weather. Wood needs a finish and gets replaced when it weathers: the USDA Forest Products Laboratory notes people often replace decking because of weathering, not decay (USDA Forest Products Laboratory). Composite skips the stain but has to be gapped for the temperature on the day it goes down, so a cool-weather install is spaced differently than a July one.
Can you keep my existing railing and just replace the boards?
Yes, if the railing posts are solid and the guard meets the current rule. New boards go in around sound posts, which are then checked and re-anchored if they move. Many railings loosen after years of freeze-thaw, though, and a wobbling post is a safety fix, so we test each one when the old boards are off. If the railing has to change, it is a separate line on the quote.
These answers also sit in the Deck Resurfacing section of our FAQ, alongside questions on pricing, scheduling and coverage.
Service Area and Towns We Cover
The same deck resurfacing service covers every town listed here, from the Twin Ports out to the small communities beyond.
Duluth neighborhoods:
Superior neighborhoods:
Outside these cities? The surrounding town notes list the other communities we serve for deck resurfacing work, and the Minnesota and Wisconsin town guides have a project checklist for each. The cost guide and pricing page cover budget and the quote process.
Town checklists for deck resurfacing projects
Project notes for towns across the service area:
Services That Pair With Deck Resurfacing Work
A New Deck Surface on a Frame You Can Trust
Send photos of the whole deck and the house wall it attaches to, and we'll check the frame and put a flat price in writing before any work starts.
Prefer to text? Text (715) 919-7956
- $95 visit fee, waived when you approve the work
- Same price across the service area
- Insured, background-checked staff