Caulking & Sealing in Duluth, MN & Superior, WI
Failed caulk cut out and replaced around windows, doors, siding trim, tubs and showers, with weatherstripping where a gap moves. We also check whether the open joint is the problem or a sign of rot behind it.
Prefer to text? Text (715) 919-7956 · $95 visit fee, waived when you approve the work
Twin Ports Contracting & Repair re-caulks and seals homes in Duluth, MN and Superior, WI: windows, doors, siding trim, tubs, showers and drafty gaps, with weatherstripping where a joint moves. Each job is priced from photos or a visit as one flat written quote you approve first, and rot or failed flashing behind a bead is shown to you before the repair grows.
| Work included | window and door perimeters, siding-to-trim joints, penetrations in the wall, tub and shower joints |
|---|---|
| Where | Duluth, MN, Superior, WI and the surrounding towns |
| Visit charge | $95 when a visit is needed, waived once you approve the work; no mileage charge. |
| Getting started | Call or text (715) 919-7956, or send photos through the quote form. |
Updated by Twin Ports Contracting & Repair, Duluth, MN
A Caulk Bead Is Only as Good as the Joint
Twin Ports Contracting & Repair re-caulks and seals homes in Duluth and Superior, and the first thing we look at is why the old bead failed. Caulk that has split along one edge has usually been stretched by a joint that moves, such as wood trim against siding that swells and shrinks with the weather. Caulk that is black and soft at the bottom of a window has often been wet from behind for a while. Running a new bead over either one hides the cause for a season or two and nothing more.
So a visit starts with probing the wood around the gap and cutting out what has let go. Then we pick the right fix for each opening: a sealant bead for gaps that do not move, weatherstripping for parts that do, backing material for wide gaps and a replacement board where the wood is soft. You get one flat written quote you approve first. Our visit fee is waived when you approve the work, and there is no mileage charge. Where air leaks through the walls or rim joist, insulation and air sealing is the larger fix.
What Our Caulking & Sealing Work Covers
- Window and door perimetersOld caulk cut out, joint cleaned and resealed
- Siding-to-trim jointsCorners, casings and butt joints resealed
- Penetrations in the wallPipes, vents, wires and hose bibs sealed
- Tub and shower jointsMoldy or split beads cut out and redone
- Sink, counter and backsplash edgesDark or peeling lines replaced
- Weatherstripping on doorsJamb strips and sweeps replaced
- Weatherstripping on windowsTracks, sashes and gaps sealed
- Foundation and sill gapsGaps sealed where wall meets masonry
- Garage and shed doorsSide and bottom seals replaced
- Attic hatch and basement rim gapsAir leaks closed before winter
- Chimney and masonry jointsSmall cracks sealed; larger repairs flagged
- Caulk before exterior paintJoints sealed once rot is fixed
Common Caulking & Sealing Projects
| Project | What's included | Good to know |
|---|---|---|
| Window and door re-caulk | Failed caulk removed, joint cleaned and dry, new bead run, rot checked | Exterior caulk needs a dry day above the sealant's minimum temperature |
| Tub or shower re-caulk | Old bead and mildew cut out, joint cleaned, new bead run | A joint that keeps failing may mean water behind the tile |
| Draft sealing | Weatherstripping, sweeps and gap sealing at doors, windows and hatches | Done indoors, so it can go on through the winter |
| Pre-paint sealing | Gaps sealed after any soft trim is replaced, ready for paint | Paint over a failed joint peels at the same joint |
| Caulk with hidden damage | Soft wood or wet sheathing found behind the bead and quoted as its own line | You see photos before the repair grows |
Which Gaps Get Caulked and Which Stay Open
Not every line on a wall wants a bead. We seal where siding or trim meets a window or door casing, at corners and butt joints in trim, and around pipes, vents and wires that pass through the wall. We leave the bottom of lap siding open, and the gap above a window's head flashing, because those let water that gets behind the siding drain back out; caulking them traps it against the sheathing.
Vinyl is a different case. Its panels expand and contract with the temperature, so they are not caulked into the trim channels, and the Vinyl Siding Institute's installation manual says overlap joints are never caulked (Vinyl Siding Institute manual). Wide gaps get backing material pushed in first so the bead has two sides to grip. Where an air leak runs through a wall, from a basement rim joist or an attic hatch for example, we seal it from the inside.
When an Open Joint Means Rot or Failed Flashing
Probe before you caulk. A screwdriver pressed into the wood under a window sill, at the bottom of a casing or along the lowest siding course tells you whether the wood is sound. Paint that bubbles in lines, a stain below a window and a joint that reopens every spring are signs that water is getting past the bead. In that case the right fix is cutting out the soft wood, checking the flashing and rebuilding, which is trim and rot carpentry or siding repair, and the caulk goes on last.
The same logic applies to a window that leaks air or water through the frame. Fresh sealant around the unit buys time if the frame is sound, and our door and window repair page covers sashes, glazing and sills. If the frame itself is rotted or fixing the same window every year, window replacement is the better value. A roof or flashing leak above the wall goes to a licensed roofer, because sealing the wall below it only moves the water.
Cold Weather, Wide Gaps and Pre-1978 Painted Trim
Weather decides the schedule. Exterior sealant needs a dry surface, no frost and a temperature inside the range printed on the tube, so exterior beads wait for a mild dry stretch, and a joint that cannot wait is made weather-tight now and finished later. Indoors it is easier: drafts at doors, windows, hatches and the basement rim can be sealed any month. Minnesota Center for Energy and Environment's rule of thumb is that a gap you could fit a fingernail or credit card into should be caulked, and bigger ones mean pulling the trim and sealing the cavity with closed-cell foam (MNCEE).
Older trim adds one more check. A house built before 1978 may have lead paint on window casings and door trim, and cutting out caulk beside that paint can disturb it. We flag painted surfaces before quoting, tell you if the work looks like it falls under the EPA lead rule, and a certified renovation firm handles anything the rule covers. Dry scraping, dry sanding and heat guns are the methods to avoid on old paint. Our lead-safe renovation guide lists what to ask any firm.
Re-Caulk, Weatherstrip or Repair? Sealing Decisions
Most sealing work is ours. When the open joint comes from rot, failed flashing or a roof leak, the fix is bigger than a bead of caulk.
| What you're seeing | Likely cause | Usual fix | Who handles it |
|---|---|---|---|
| Caulk split or pulling away from trim | Joint movement or old caulk past its life | Cut out the old bead, clean, dry and re-caulk | Us |
| Black, soft caulk at the bottom of a window | Water getting in from behind the bead | Probe the wood and sill, repair rot, then re-caulk | Us |
| Daylight or a draft around a door that opens | Worn weatherstripping or sweep | Replace the jamb strip and door sweep | Us |
| Mildew line along the tub or shower | Wet, moving joint; possible leak behind tile | Re-caulk; if it fails again, check for a leak | Us; see shower repair |
| Paint peeling along a trim joint | Failed joint letting moisture in | Scrape, spot-prime, seal and repaint; pre-1978 homes flagged first | Us; a certified renovation firm if the EPA lead rule applies |
| Stain or drip inside under a roof edge or chimney | Roof or flashing leak above the wall | Fix the roof first, then the interior | A licensed roofer, then us |
Why Caulk Fails Faster in the Northland
Lake Superior wind drives rain sideways at every trim joint on the lake side of a house, and shaded north walls stay damp long enough to feed mildew in the bead. Add a daily winter swing from freezing to thawing and the gap between trim and siding opens and closes all season. On a Duluth hillside the back wall can stand a story taller than the front, so the high joints get a ladder plan before we quote. Superior's flat, clay-heavy lots hold water near the foundation, which is why we look at sill gaps there too. See our pages for handyman work in Duluth and in Superior.
Caulking and Sealing Around the Twin Ports
Resealing a joint rarely needs a permit anywhere in the area, but the work around it sometimes does: swapping a rotted window or door, re-siding a wall or opening a wall to fix flashing. Here is where each office draws that line, and why the build year of your house matters more than the town. Roof leaks go to a licensed roofer. We check what your address needs before we quote.
Caulking and Sealing in Duluth, MN
Minnesota's code says ordinary repairs need no permit application (Minn. R. 1300.0120), which covers cutting out and renewing caulk and weatherstripping in Duluth. Replacing a window or door is a different question: Duluth has a separate residential permit type for it (City of Duluth), and its residential FAQ lists window and door replacement among work that needs a building permit (City of Duluth). So a re-seal around a sound window is a repair visit, while a rotted frame that has to come out is a permit conversation.
Duluth's older neighborhoods matter here. A large share of West Duluth homes, likely a majority, were built before 1939 (Wikipedia), so the paint under old caulk on casings and sills may contain lead. EPA's rule covers paid work that disturbs paint in homes built before 1978 (EPA), and that is why we flag the paint first.
Caulking and Sealing in Superior, WI
Superior's Permits Not Required list names installing weatherstripping on doors and windows, and in the same list siding changes made while trimming new windows (City of Superior). The list also notes that lead-safe practices may be required for any listed item, and Wisconsin's own lead-safe renovation rule applies to paid work on homes built before 1978 (Wisconsin DHS). Superior's flat lots and clay soil keep water near foundations, so sill and rim-joist gaps are worth a look on a draft check there.
Caulking and Sealing in Hermantown and Proctor
Hermantown requires a building permit to replace roofing, siding, windows or doors, even like for like (City of Hermantown), so a window that has outlived its caulk and needs swapping starts at the city office, while resealing it does not. Proctor requires a permit for siding and for doors and windows, but needs no building permit for window wraps, gutters or soffit and fascia (City of Proctor), so new trim wraps and the sealing that goes with them can go ahead without one.
Caulking and Sealing in Cloquet and Rural Carlton County
Rural Carlton County needs no zoning permit for replacing windows or doors or for re-siding, and doesn't enforce the state building code (Carlton County), which keeps most sealing and trim work simple around Mahtowa. Cloquet and Esko run their own offices, so confirm there before a window or siding swap grows out of a re-seal.
To find the permit office for caulking & sealing work at your address, use the Minnesota or Wisconsin list: it names the office for each town, with a phone number and what that office exempts.
How the Caulking & Sealing Quote and Job Run
What to Send for a Caulking or Sealing Quote
Photos are the fastest way to a caulking quote. Take one wide shot of each wall or room, then close-ups of the worst joints: the bottom corners of windows, where siding meets trim, the tub edge or the gap under a door. If you can, press a screwdriver into the wood under the sill and tell us whether it is soft. Add the age of the house, because old paint changes the plan, and note which joints leak air and which leak water.
Before requesting a quote, include: A wide shot plus close-ups of the worst joints; Whether the wood under the caulk feels soft; The home's build year and any known paint issues. A repair-list planning guide is available if you want help putting this in order.
How a Caulking & Sealing Job Works
- Send the details. Describe the caulking & sealing job in the quote form and attach photos, or call (715) 919-7956.
- Get a flat written quote. A visit, when one is needed, is $95 with no mileage charge, and the fee is waived when you approve the work; the quote itself is one flat price.
- Pick a day. You choose the day, and the schedule is built around yours.
- Work done, then a walkthrough. You get a tidy site and a final look at the caulking & sealing work, backed by a written guarantee: workmanship that fails is redone at no charge.
Caulking & Sealing Questions
Who does caulking near me in Duluth, Superior and the towns around them?
Twin Ports Contracting & Repair does caulking and sealing across Duluth, Superior, Hermantown, Proctor and the nearby towns. Text photos of the windows, doors or trim to (715) 919-7956 and many jobs can be quoted from them. When a visit is needed it is a flat $95 that is waived when you approve the work. The quote lists each joint, any rot found behind it and the weatherstripping, so nothing is a surprise.
How cold is too cold to caulk the outside of a house?
Colder than the label on the tube allows. One sealant maker says caulk is applied best between 40 and 80 degrees F, warns that frost or condensation on the surface blocks adhesion, and notes that cold slows curing (Tremco). Every product sets its own limit, so we follow the label. In deep winter we seal inside and weatherstrip, and save exterior beads for a warm, dry day.
Should I use caulk or weatherstripping to stop a draft?
Weatherstripping goes on parts that move, and caulk goes in gaps that do not, according to Virginia Cooperative Extension (Virginia Cooperative Extension). A door that opens, a sash that slides or a garage door gets a strip or sweep. A joint between trim and siding gets caulk. If a gap is wider than the caulk can bridge, backing material goes in first, and we tell you which each draft needs.
Is caulking or weatherstripping covered by a permit in Duluth or Superior?
No, not for ordinary sealing. Superior's Permits Not Required list includes installing weatherstripping on doors and windows, and Minnesota's building code says ordinary repairs need no permit application (Minn. R. 1300.0120). Replacing a window or door is different: Duluth has its own permit type for that (City of Duluth). We check what your address needs before we quote.
Is it safe to scrape out caulk and old paint on trim in a house built before 1978?
Not until the paint has been checked. Old paint on trim and windows may contain lead, and paid work that disturbs it falls under the EPA lead rule. On a pre-1978 house we flag painted surfaces before quoting, and a certified renovation firm handles any work the rule covers. Tell us the build year when you send photos, and avoid dry-scraping or sanding old paint yourself.
Why does the caulk around my tub keep cracking and turning black?
Because the joint moves and stays wet. A tub shifts slightly when it fills, and soap film and moisture feed mildew in any bead that is not dry before it is closed. We cut out the old bead, clean and dry the joint, and run new caulk. If it has failed a third time, water may be getting behind the tile, and that becomes a shower repair question, not another bead.
Can you caulk right over the old caulk?
Usually not, and we don't. A new bead only holds if it grips the surface underneath, and old caulk that has let go, or that is black with mildew, gives it nothing to grip. We cut the old bead out, clean the joint, let it dry and run new caulk. The exception is a firm, clean bead with only a small gap, which can be touched up. You will see which it is when we look.
These answers also sit in the Caulking & Sealing section of our FAQ, alongside questions on pricing, scheduling and coverage.
Where We Work: Our Service Area
Pick your town to see how caulking & sealing work goes there.
Duluth neighborhoods:
Superior neighborhoods:
Most towns in our area are covered for caulking & sealing work. The surrounding town notes list them, and the Minnesota and Wisconsin guides say what to send with a request.
Town checklists for caulking & sealing projects
Project notes for towns across the service area:
Services That Pair With Caulking & Sealing Work
Seal the Gaps Before Winter Finds Them
Send photos of the windows, doors, trim or tub you are worried about, and we'll find what is behind the caulk and put a flat price in writing before any work starts.
Prefer to text? Text (715) 919-7956
- $95 visit fee, waived when you approve the work
- Same price across the service area
- Insured, background-checked staff